The anchors are components of the fall arrest system. They can be either temporary or permanent. In any case, they must be connected to a retention structure, which must be sturdy enough to absorb the forces generated in the event of a fall. There are four types of anchors:

Hoistech supplies anchors from Capital Safety and Tractel. Some examples of Tractel products are below. Click here for Capital Safety anchors.

A unique product from Capital Safety: MOBI-LOK. This is a temporary vacuum anchor system specially designed for the Aviation industry, but can also be used on all smooth surfaces.

Axamples of temporary anchors: belt ring AS 19, Tracpode, door bar, Rollclamp, Rollbeam

AS 19

Ring (supplied without connector) for anchoring on a structure on which a fall-arrest system has been installed.

- Bare anchor ring
- Webbing strap rings available in lengths of 0.6 m, 1 m, 1.5 m and 2 m.
- Polyester webbing strap with protective sleeve, for model GA.
- Complies with StandardEN795 class B.

AS 19 GA

Ring (supplied without connector) for anchoring on a structure on which a fall-arrest system has been installed.

- with protective sleeve against sharp or abrasive edges.
- Webbing strap rings available in lengths of 0.6 m, 1 m, 1.5 m and 2 m.
- Polyester webbing strap with protective sleeve, for model GA.
- Complies with Standard EN795 class B.

Webbing strap ring

Ring designed to create an anchor point on a framework onto which a fall prevention device can be attached.

- Polyester webbing strap.
- Available in lengths of 0.6 m, 0.8 m and 1 m.

Corso clamp

Hitching clamp equipped with anchoring ring.

- Compact and strong construction
- Fast and simple adjustment to section
- Removable handle

Rollbeam

Pushed trolley

- Travels on lower iron footplate
- Standard CE EN 795 class B

Rollclamp

Enables the creation of a mobile anchor point on an R.S.J. and to work in safety while retaining a wide freedom of movement. Thanks to its 4 bearing rollers, the Rollclamp follows movements around the framework with a minimum of user intervention. The Rollclamp anchorage device provides maximum
safety against falling for people working on metal structures. The Rollclamp anchorage device is intended
exclusively for anchoring a personal fall protection system, for example a lanyard with shock absorber
or a Blocfor retractable lanyard

- Two models : 380mm and 640mm max.
- Adjustable from 120mm to 640mm.
- Can be installed on the upper or lower soleplate
- rollclamp Weight : M 1.48 Kg and L 2.04 kg
- Complies with Standard EN795 class B

The Door Bar - or how to use a door or window as an anchor point

- Standard : CE EN 795 class B
- Very fast and easy to set up
- Up to 2 users
- Spacing: 1100mm = 1 user, 800mm = 2 users

Tracpode

Adjustable telescopic feet with pivoting sole plate.

- Height: min. 1.78m | max. 2.73m
- Width: min. 1.30m | max. 1.87m
- Weight: 17 kg.

Mobifor

The Mobifor anchor point is a fast, reliable solution for temporary or permanent anchoring on terrace roofs.

- No tools required for installation
- Easy to set up
- Adapts to all situations
- Enhanced fall protection
- Complies with standard EN 795 E